Open main menu

HoloWiki - A Holography FAQ β

Reading a MSDS

This page is under construction!

Here is an example MSDS for denatured alcohol.

MSDS 03200, Revision 2.0 / Revision Date 12/18/01 JC Formula 3 200 Proof / Page 1 of 2 Product Information (xxx) xxx-xxxx / Emergency Assistance (xxx) xxx-xxxx

MATERIAL SAFETY DATA SHEETS SECTION I PRODUCT AND COMPANY IDENTIFICATION PRODUCT: Denatured Ethanol, Anhydrous (Prop Solv. #3) This MSDS is valid for all grades and catalog

  1. ’s including 123PS3200 and 124003200

Synonyms: Denatured Ethanol Anhydrous, Industrial Alcohol Formula: Mixture Manufacturer: Pharmco Products Inc. 58 Vale Road Brookfield, Connecticut 06804, USA Phone (203) 740-3471 Fax (203) 740-3481 Emergency Contact: CHEMTREC 1-800-424-9300

SECTION II COMPOSITION /INFORMATION ON INGREDIENTS %vol Material CAS Exposure Limits 92.46 Ethanol 64-17-5 1000ppm TWA 3.7 Methanol 67-56-1 200ppm TWA, OSHA/ACGIH;250pp m STEL OSHA/ACGIH 1.9 MIBK 108-10-1 50ppm PEL/OSHA; 50ppm TLV .97 Ethyl Acetate 141-78-6 400ppm TWA .97 Toluene 108-88-3 100ppm TWA/OSHA 150ppm STEL/OSHA SECTION III HAZARDS IDENTIFICATION Carcinogen Status: Established uses of denatured ethanol are not considered to pose a significant cancer hazard. Poisonous: This product contains methanol. It can not be made non-poisonous. Ingestion of 60-200ml of methanol is a fatal dose for most adults. Ingestion of 10ml may cause blindness. Routes of Exposure: Swallowing: May cause dizziness, faintness, drowsiness decreased awareness or responsiveness, nausea, vomiting, staggering gait, lack of coordination, blindness, coma and death. Skin Absorption: Prolonged or widespread contact may result in the absorption of potentially harmful amounts. Inhalation: High vapor concentration may cause burning sensation in nose and throat and stinging and watering in the eyes. At concentrations which cause irritation, dizziness, faintness, drowsiness, nausea and vomiting may also occur. Skin Contact: Prolonged or repeated contact may cause defatting and drying of the skin. Eye Contact: May cause irritation including stinging, tearing, and redness Effects of Repeated Overexposure: Long term repeated oral exposure to ethanol may result in the development of progressive liver injury with fibrosis. Overexposure to methanol may cause eye damage and liver or kidney injury. Other Health Hazards: Repeated ingestion of ethanol by pregnant mothers has been shown to adversely affect the central nervous system of the fetus, producing a collection of effects which together constitute fetal alcohol syndrome. Medical Conditions Aggravated by Overexposure: Repeated exposure to ethanol may aggravate liver injury produced from other causes. Skin contact may aggravate dermatitis. SECTION IV FIRST AID Obtain medical attention for all cases of over-exposure. Swallowing: If patient is fully conscious, give two glasses of water. Induce vomiting. Obtain medical attention. Skin: Wash skin with soap and water for at least 15 minutes Inhalation: Remove to fresh air; Give artificial respiration if not breathing; If breathing is difficult oxygen may be given by qualified personnel; Obtain medical assistance is discomfort persists. Eye Contact: Flush eyes with water for at least 15 minutes. Obtain medical assistance. Note to Physician: Symptoms vary with alcohol level of the blood. Mild alcohol intoxication occurs at blood levels between 0.5-.15%. Approximately 25% of individuals show signs of intoxication at these levels. Above .15% the person is definitely under the influence of ethanol; 50-95% of individuals are clinically intoxicated at these levels. Severe poisoning occurs when the blood is ethanol level is 0.3- 0.5%. Above 0.5% the individual will be comatose and death can occur. The unabsorbed ethanol should be removed by gastric lavage after intubating the patient to prevent aspiration. Avoid the use of depressant drugs or the excessive administration of fluids. SECTION V FIRE FIGHTING MEASURES Fire/Explosive Properties - For Pure 200 Proof Ethanol Flash Point: 58F (14C)Tag Closed Cup Flammable Limits in Air (for ethanol): For pure ethanol: 3.3% - 19.0% Flammability Classification: 3 (NFPA) 1993 Emergency Response Guidebook: Guide 26 (for pure ethanol) 1996 North American Emergency Response Guidebook: Guide 127 (for pure ethanol) Extinguishing Media: Apply alcohol-type or all-purpose foam by manufacturer’s recommended techniques for large fires. Use carbon dioxide or dry chemical media for small fires. Special Fire Fighting Procedures: Use water spray to cool fireexposed containers and structures; Use water spray to disperse vapors - re-ignition is possible; Use self-contained breathing apparatus and protective clothing. Unusual Fire and Explosion Hazards: ¨ Vapors may travel to source of ignition and flash back. ¨ Vapors may settle in low or confined spaces. MSDS 03200, Revision 2.0 / Revision Date 12/18/01 JC Formula 3 200 Proof / Page 2 of 2 ¨ May produce a floating fire hazard. ¨ Static ignition hazard can result from handling and use. SECTION VI SPILL/ACCIDENTAL RELEASE MEASURES Small spills can be flushed with large amounts of water. Large spills: Eliminate all ignition sources; ground all equipment; do not walk through spill; stop spill if possible; prevent entry into sewers, confined spaces, etc.; use a vapor suppressing foam to reduce vapors; absorb spill with noncombustible matter and transfer to containers; use nonsparking tools to collect absorbed material. Refer to Section 11 for disposal information. SECTION VII HANDLING AND STORAGE ¨ Flammable material - keep away from heat, sparks, and flame; sudden releases of hot organic vapors or mists from process equipment operating at elevated temperature may result in ignitions without the presence of obvious ignition sources. ¨ Avoid contact with eyes. ¨ Keep container closed. ¨ Use with adequate ventilation. ¨ Ground container when transferring product. ¨ Vapors may collect in containers; treat empty containers as hazardous. ¨ Wash thoroughly after handling ¨ Vapors may settle in low or confined areas ¨ Danger - may cause blindness or death if swallowed SECTION VIII EXPOSURE CONTROLS / PERSONAL PROTECTION Ventilation: Special, local ventilation is needed where vapors escape to the workplace air Respiratory Protection: Use self-contained breathing apparatus in high vapor concentration Personal Protective Equipment: gloves, lab coat or uniform, safety glasses, eye wash, safety shower SECTION IX PHYSICAL AND CHEMICAL PROPERTIES Appearance: clear, colorless liquid Odor: characteristic Characteristics for 200 Proof Ethanol: Vapor pressure @ 20C: 44.6mm Hg Vapor density: 1.6 (air =1) Boiling point @ 760mm Hg: 78.3 C (172.9F) Freezing Point: < -114.1C (<-173.4F) Solubility in Water: 100% @ 20C Density @ 15.56C (60F) 6.6lbs/gal Evaporation Rate: 3.0 (butyl acetate = 1) Percent Volatiles: 100% Specific Gravity : .796 @ 15.56 SECTION X STABILITY/REACTIVITY INFORMATION Stability: Stable Conditions to avoid: None known Incompatibility/Materials to avoid: strong oxidizing agents; strong inorganic acids Hazardous Combustion/Decomposition Products: Carbon monoxide and/or carbon dioxide Hazardous Polymerization: Will not occur SECTION XI DISPOSAL CONSIDERATIONS Vapors may collect in empty containers. Treat empty containers as hazardous. Dispose of spill-clean up and other wastes in accordance with Federal, State, and local regulations. SECTION XII TRANSPORTATION INFORMATION Proper Shipping Name: Alcohol, nos Hazard Class: 3 UN Number: 1987 IMO Information: Alcohols, NOS Label of Class: 3 Packing Group II Intermediate flashpoint group SECTION XIII REGULATORY INFORMATION Federal EPA Comprehensive Environmental Response Compensation, and Liability Act of 1980 (CERCLA) requires notification of the National Response Center of release quantities of Hazardous Substances equal to or greater than the reportable quantities (RQs) in CFR. Components present in this product at a level which could require reporting under this statute are: Chemical CAS Number Upper Bound Conc. % MIBK 108-10-1 1.9 Methanol 67-56-1 3.7 Acetaldehyde 75-07-0 .0010 Toluene Ethyl Acetate 108-88-3 141-78-6 .97 .97 Superfund Amendments and Reauthorization Act of 1986 (SARA) Title III requires emergency planning based on threshold planning quantities and release reporting based on reportable quantities in 40 CFR 355 (used for SARA 302, 304, 311, and 312). Components present in this product at a level which could require reporting under this statute are: none. Superfund Amendments and Reauthorization Act of 1986 (SARA) Title III requires submission of annual reports of release of toxic chemicals that appear in 40 CFR 372 (for SARA 313). This information must be included in all MSDS’s that are copied and distributed for this material. Components present in this product at a level which could require reporting under the statute are: Methanol (67-56-1) upper bound concentration 3.7% Toxic Substances Control Act (TSCA) Status: The ingredients of this product are on the TSCA inventory. State Right to Know California Proposition 65: This product contains trace levels of acetaldehyde known to the State of California to cause cancer. This product contains toluene which the State of California has found to cause birth defects or other reproductive harm. Massachusetts: Hazardous substances and extraordinarily hazardous substances must be identified. Components present which could require reporting: Extraordinarily Hazardous (=> 0.0001%): Acetaldehyde (CAS 75-07-0) upper bound conc. .0010% Hazardous (=>1%): Ethanol (CAS 64-17-5) upper bound conc. 92.46% Methanol (CAS 67-56-1) upper bound conc. 3.7% Pennsylvania: Hazardous substances must be identified. Hazardous (=>1%): Ethanol (CAS 64-17-5) upper bound conc. 92.46% Methanol (CAS 67-56-1) upper bound conc. 3.7% California SCAQMD Rule 443.1 (VOC’s) A Volatile Organic Compound (VOC) is any volatile compound of carbon excluding methane, carbon monoxide, carbonic acid, metallic carbides, or carbonates, ammonium carbonate, 1,1,1 tri-chloroethane, methylene chloride, (FC-23), (CFC-113), (CFC-12), (CFC-11), (CFC-22), (CFC- 114) and (CFC-115). VOC 800g/l; vapor pressure 41.4 mm Hg @20C for pure 190 proof ethanol The information contained herein is based on data considered to be accurate. However, no warranty is expressed regarding the accuracy of these data or the results to be obtained from the use thereof. It is the user’s obligation to determine the conditions of safe use of the product.